Lorex LW1002W Instruction Manual

COLOR WIRELESS SURVEILLANCE SYSTEM WITH INDOOR / OUTDOOR NIGHT VISION CAMERA(S) Instruction

Camera Installation 10 Camera Installation Before you install the camera(s), carefully plan where and how it will be positioned, and where you wi

Camera Installation 11Installing the Camera: 1. Carefully unpack the Camera. 2. Decide whether the camera will be permanently wall mounted or s

12 Wall Mounting Instructions (for the LW1010, LW1012, LW1020, LW1022 ONLY) To mount the camera to a wall: 1. Loosen the screw locate

13 4. Insert the Camera into the top slot of the stand. 5. Point the camera in the desired position. Tighten the side screw to s

14 NOTE: Wireless cameras require a power source (either an electrical outlet or battery power) to operate. If you plan to permanently mount the

Troubleshooting 15Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following:

Appendix #1 - Receiver Specifications 16 Appendix #1 - Receiver Specifications Feature Specification LW1001 / LW1002 Specification LW1010 / LW10

17

2 Thank you for purchasing the LW1000 Series Color Wireless Series Surveillance System. Lorex is committed to providing our c

Important Safeguards 3Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your v

Important Safeguards 4 Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may exp

General Precautions 5General Precautions 1. All warnings and instructions of this manual should be followed 2. Remove the plug from the outlet be

Features 6 Features  ‘EWT’ Eliminates Interference From Most Household Devices  Fast & Easy Installation- Plug Into any AC Outlet  Rece

Getting Started 7Getting Started The LW1001 and LW1002 come with the following components: CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RE

Wireless Receiver 8 Wireless Receiver 1. DC 9V (5V for LW1020/LW1022) INPUT – Connection port for the 9V/5V Power Adaptor (provided with th

Control Buttons 9LW1001 and LW1002Control Buttons 1. AUTO BUTTON – When the receiver is set to AUTO Mode, it will continuously switch between co