Lorex LW2734B User's Guide Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
33
Pairing/adding cameras
Pairing/adding cameras
If you have purchased additional cameras, it is highly
recommended to pair the cameras to the receiver
before permanent installation.
IMPORTANT
"Pairing" is an electronic handshake between wireless devices. Wireless devices and
components need to be paired in order to communicate with each other.
The camera(s) provided with the system have already been paired to the LCD receiver. By
default, the camera(s) included are automatically paired to channels 1 & 2 on the wireless
receiver. See channel label on the camera to check which channel it has been set to.
If you have purchased additional accessory cameras, you will need to pair them to the receiver.
When pairing cameras, you can select the channel you would like the cameras to be assigned
to. You can also use the steps below to reassign your existing cameras to different channels.
NOTE: Ac
cessory cameras (model# LW2731AC1) are available from
www
.lorextechnology.com.
To pair an additional camera:
1 Connect the new camera to a power outlet when you are
ready to begin the pairing process. Place the camera and
LCD receiver within 1ft of each other.
2 Press
on the wireless receiver.
3 From the Main Menu, press left and right to select Pairing
and press the OK button.
4 Select a channel and press the
OK button.
NOTE: If you pair a new camera to a channel that is already being used by an existing
c
amera, the new camera will be connected to that channel. The old camera will
automatically be disconnected.
5 Following the on-screen prompt, press the
Pair button behind the camera for 1 second. You
have 30 seconds to press the Pair button on the camera. Once paired, the camera will be
immediately displayed on-screen.
Pair button
NOTE: If you do not press the Pair button on the camera during the 30 second pairing
window, repeat steps 2~5 to try the pairing process again.
NOTE: If the speaker begins squealing, mo
ve the camera and receiver away from each other.
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Comments to this Manuals

No comments