Lorex SC325000 User Manual download pdf (Page 22)

Alarm Set

1. DURATION - Sets the length of time an ALARM

message is displayed on the monitor. Navigate to

this option using the

 buttons, and press the

 button to change the option to one of the following

settings: 5 SEC / 10 SEC / 15 SEC / 20 SEC / 25

SEC / 30 SEC or CONT (Continuous Alarm).

2. CHANNEL1 - CHANNEL4 - Sets the Channel to

ON/OFF for Alarm detection. Navigate to this

option using the

 buttons, and press the 

button to change the option.

When an ALARM is detected, an indicator appears

at the top LEFT corner of the monitor screen. For

example:

ALARM [ 1UU- ]

This indicates that Channel 1 is in ALARM, and the

U displayed on Channels 2 and 3 indicate that these

channels are set to NO (no ALARM). The - on

channel 4 means that this channel is not currently in

ALARM mode.

This submenu allows you to set the Alarm (based on Sensor or Motion input). When a Sensor

event or Motion is detected, an Alarm EVENT will be triggered and an indicator will be displayed

on the top left side of the monitor screen (see the QUAD screen diagram on the bottom of page

29).

ALARM

DURATION

CHANNEL1

CHANNEL2

CHANNEL3

CHANNEL4

[ 5 SEC ]

[ YES]

[ NO ]

[ YES ]

[]MOVE []SELECT []EXIT

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

No comments

Lorex SC325000 User Manual Page 22