Lorex LW2220 Instruction Manual download pdf (Page 16)

Installing The Camera

4. Installing The Camera

• Before you install the camera, carefully plan where and how it will be

positioned and where you will route the cable that connects the camera

to the power adapter. 

• Before starting permanent installation, verify the camera’s

performance by observing the image on a monitor when camera is

positioned in the same location / position where it will be permanently

installed.

4.1 Installation Warnings

• Aim the camera(s) to best optimize the viewing area: select a location for the camera that

provides a clear view of the area you want to monitor, that is free from dust, and that is not

in line-of-sight to a strong light source or direct sunlight.

• Avoid installing the camera where there are thick walls or obstructions between the camera

and the receiver.

• Avoid installing in a location which requires the wireless signal to pass through cement,

concrete, and metal structures. This will reduce the range of transmission. For details, see

“Appendix C: Facts About Digital Wireless Cameras” on page 10.

• Select a location for the camera that has an ambient temperature between 14°F~122°F

(-10°C~50°C)

• Not intended for submersion in water. For outdoor use, installation in a sheltered location is

recommended.

4.2 To Install the Camera

1 Screw the antenna to the back of the camera.

2 Use the included mounting screws to mount the stand to the mounting surface:

• Mark

the position of the

scre

w holes on the wall.

• Drill holes and insert the

drywall plugs (included) as

needed.

• Firmly attach the stand to the

wall using the provided

screws.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Lorex LW2220 Instruction Manual Page 16